EDYO LIVING ZHX-23-040, Use And Care Manual

Page: 6 / 11

— 4 —
A 15 AMP circuit is required to operate this appliance.If the breaker trips when the appliance is running,
you may need to move the appliance to another location or unplug other appliances that are on the same
circuit.
The fireplace control functions can be accessed in two ways:
- Using the control panel, located in the upper right-hand corner of the electric insert.
- Using the multifunctional remote control.
The main control panel is located at the top right corner on the front (Figure 2).
Figure 3

PWOER (Figure 3.A):

The POWER button supplies power to all the features of the fireplace. This button must be ON for any of the
features to work properly.

Once turn ON , activates the flame and amber light flickering.

Once turn OFF , all current settings will be stored and then restored at the next power ON (except Timing
Control). Unplug the unit will reset the setting to factory default.

Flame Effect (Figure 3.B):

The FLAME button controls the color of flame.

It is invalid to OFF or child lock state.
Control Panel
Figure 2
3a. Manual Control Panel