Edirol VC-50HD SDI 1394, Owner'S Manual

Page: 17 / 37

17
Power supply
3.
Install eight AA batteries in the battery case
Taking care to observe the correct polarity ( orientation), insert the batteries in accordance with the
symbols imprinted inside the battery case.
fig.load-battery.eps
4.
Insert the battery case into the VC-50HD
Insert the battery case into the VC-50HD as it was originally. When doing so, take care that no
metallic foreign object touches the terminals of the battery case. This could short-circuit the
battery, possibly causing it to overheat or ignite.
5.
Close the rear cover
Close the rear cover as it was originally, and use the two screws to fasten it.
Caution regarding batteries
* When inserting batteries, take care to observe to observe the correct polarity ( orientation) in accordance with
the symbols imprinted inside the battery case.
* Remove the batteries if you won’t be using the VC-50HD for an extended period of time (several months or
longer).
* Do not mix fresh batteries with used batteries, and do not mix batteries of differing types.
* If a battery should leak, use a soft cloth to carefully wipe off any leaked electrolyte from the battery case, and
then install new batteries. Battery electrolyte that contacts your skin may cause a rash. Battery electrolyte is
harmful to the eyes; if any gets into your eyes, thoroughly rinse your eyes with water.
* Do not carry or store batteries together with metallic objects such as pens, necklaces, or hairpins.
* Carefully read and observe any precautions and handling instructions that accompany the batteries.
Continuous use of AA batteries
When using nickel-metal hydride batteries or alkaline batteries, the battery life for continuous
operation is as follows.
fig.battery-life.eps
* The above times are approximate. They will change depending on conditions of use, such as the temperature.
Battery Type
Nickel Hydride
Alkaline
Operation Time
Approx 2 hours
Approx 30 minutes (backup)