22
Connections with video devices
This section explains the types of conversions and mode settings provided by the VC-50HD. The
correct mode setting must be made in order to perform each type of conversion.
Converting SDI to IEEE 1394
From a device with an SDI output connector, the SDI signal can be input to the VC-50HD and
converted to IEEE 1394. For the audio mode setting, set switches 2 and 3 according to the desired
audio output channels.
For details on channel settings for embedded audio, refer to “Specifying the audio input/output
channels” (p. 27).
fig.SDI-PC.eps
Before switching modes, you must either disconnect your external device from the IEEE 1394
connector, or power-off the VC-50HD.
Pay attention to the writing speed if you will be recording on your computer’s external media,
such as a USB hard disk. Writing errors may occur if you use slower media. Use media that has
as fast a writing speed as possible.
Nonlinear editing software that has been verified to work while capturing via the VC-50HD will
be listed periodically on the following Roland website.
http://www.rolandsystemsgroup.net/
Summary of Contents for VC-50HD SDI 1394
