92
Practical Use of the PR-80
10.
If you're switching the Stream mode for masking via MIDI, go to "Mask Control" and set the
MIDI message to be used. (Controls are not accepted via MIDI when this is set to [OFF].)
Masking is switched on and off using the selected MIDI message.
fig.midi04a.eps
11.
Set the MIDI messages for use with the Time Trip Pad featured on V-Synths and other
instruments. (MIDI controls cannot be received if the check box is not selected, making a
check mark appear in it.)
The selected MIDI message is controlled with the Time Trip Pad.
You can use the Time Trip Pad to play back clips. Simply press the pad to stop playback, rotate
clockwise to have the clip play back according to the speed with which you rotate the pad, rotate
counterclockwise to play back in reverse, and release the pad to resume ordinary playback.
fig.midi05.eps
Set the Time Trip Pad’s vertical axis.
fig.midi06.eps
12.
Click the [Done] button.
Select a MIDI message
Select a MIDI message
Mark the checkbox
Select a MIDI message
Mark the checkbox
PR-80_e.book 92 ページ ２００５年１月６日 木曜日 午後９時２２分
