79
Practical Use of the PR-80
Capturing Video from a Video Deck or Other Device
This procedure captures video from a video deck or other device.
1.
Click the [Capture] button at the lower right of the Edit Mode screen.
The “Capture” screen appears.
fig.capture01.eps
2.
Use the keyboard to enter the name of the material to be newly captured.
3.
Select the connector to which the video deck or other device is connected.
4.
Start playback of the external device.
You can see the playback in the monitor.
When you connect a deck to the PR-80 with a DV cable and select “DV” input, you can operate the
deck with transport buttons in the screen.
5.
Clicking the [Start] button starts recording.
Click the [Frame] button to capture a single frame.
If instead of the [Frame] button you press the [Auto-cut] button, the material is automatically
segmented at the points where the scenes change and then saved. In this case, the materials are
automatically given names such as “Title-0001” and “Title-0002.”
6.
Click the [Stop] button to stop capturing.
It makes the captured video into a single material.
If you click the [Cut] button, it segments the captured video at your click timing. In this case, the
materials are automatically given names such as “Title-0001” and “Title-0002.”
7.
Click the [Close] button to close the “Capture” screen.
8.
The captured material appears in the material list in Edit mode.
The imported material is indicated by a name such as “Title-0001.”
Select input
Stop button
Monitor
Start recording button
[CLOSE] button
PR-80_e.book 79 ページ 2005年1月6日 木曜日 午後9時22分