58
Introduction to Use of the PR-80
Turning Loop Playback On and Off
You can turn the Loop Mode settings on and off to have the same clip play repeatedly, play clips in
sequence, or play back another specified clip.
Click the [Loop] button to switch the setting.
fig.playmode09.eps
When the [Loop] button is lit, the clip plays according to its loop mode setting and the automatic
playback settings. When setting the loop mode, you can either assign the same setting to clips of the
entire palette, or to each video clip individually.
To assign the same setting to clips of an entire palette, refer to “Making the Palette Settings” (p. 66).
To set each clip, refer to “Setting Loop Mode for Each Clip” (p. 74). To set the automatic playback,
refer to “Setting Automatic Playback” (p. 77). When the [Loop] button is not lit, playback will stop at
the last frame or the out point of the clip (automatic playback will not be available).
[Loop] button
PR-80_e.book 58 ページ ２００５年１月６日 木曜日 午後９時２２分
