44
Introduction to Use of the PR-80
Turning Off the Power
1.
Turn the volume levels down completely on any audio equipment
(amps, mixers, etc.) connected to the PR-80.
2.
Turn off the power to the PR-80.
When Using Selector:
Click the [Power off] button.
When Using Presenter:
2-1.
Click the [EXIT] button at the upper left of the screen.
fig.playmode04.eps
2-2.
The message “Do you want to shut down?” appears; click the [Power off] button.
When Using [POWER] button:
2-1.
Press the PR-80’s [POWER] button.
fig.front.power.eps
2-2.
The message “Are you sure you want to shut down?” appears; click the [OK] button.
fig.poweroff.eps
• If a project has not been saved, the message “Would you like to save the current project?”
appears. If you want to save the project, click the [Save] button.
• Do not hold down the [POWER] button for four seconds or longer.
3.
Turn off the power to all of the peripheral devices connected to the PR-80.
[EXIT] button
POWER
PR-80_e.book 44 ページ 2005年1月6日 木曜日 午後9時22分