Edirol PR-80 Owner'S Manual Download Page 104

Page: 104 / 144

104

Practical Use of the PR-80

Displaying the Color Bar, Switching the Play Mode and Edit Mode,
and Turning Off the Power

The following operations are common to each of the Presenter's modes.

fig.dv7c.play.eps

Displaying the Color Bar

Go to the lower right, hold down the [SHIFT] button, and press the [COLOR BAR] button.
To stop the display, perform the same operation again.

Switching the Play and Edit Modes

Go to the lower right, hold down the [SHIFT] button, and press the [MODE] button.

Turning Off the Power

Go to the lower right, hold down the [SHIFT] button, and press the [OFF] button located near the
center.

It is not possible to perform this procedure two or more times in rapid succession while holding down
the [SHIFT] button at the lower right.

Making the Clip Settings

You can set the In and Out points in Edit mode. For more detailed information, refer to “Setting the
Clip Playback Segment” (p. 70).

COLOR BAR

MODE

OFF

SHIFT

PR-80_e.book 104 ページ２００５年１月６日　木曜日　午後９時２２分

Summary of Contents for PR-80

















































































































































Search results

Summary of Contents for PR-80

Reviews:

Related manuals for PR-80

Brands by name

Popular brands

Edirol PR-80, Owner'S Manual

Search results

Summary of Contents for PR-80

Reviews:

Related manuals for PR-80

Brands by name

Popular brands