Edirol PCR-A30 Owner'S Manual Download

Page: 19 / 112

Getting Connected and Installing Drivers (Windows)

The

Files Needed

dialog box will appear.

Input the following into the

“Copy files from”

field, and click

[OK]

(drive name) : \DRIVER\USB_XP2K

* The drive name may be different for your system. Specify the drive name of your CD-

ROM drive.

The screen will indicate

“Completing the Found New Hardware Wizard”

Click

[Finish]

The

System Settings Change

dialog box will appear.

Click

[Yes]

. Windows will restart automatically.

Log on to Windows as a user with administrative privileges (e.g.,
Administrator).

After you have logged on to Windows, the

Insert Disk

dialog box will

appear again.Click

[OK]

The

Files Needed

dialog box will appear.

Input the following into the

“Copy files from”

field, and click

[OK]

(drive name) : \DRIVER\USB_XP2K

* The drive name may be different for your system. Specify the drive name of your CD-

ROM drive.

The screen will indicate

“Completing the Found New Hardware Wizard”

Click

[Finish]

The

System Settings Change

dialog box may appear.

Click

[Yes]

. Windows will restart automatically.

If the

System Settings Change

dialog box does not appear, restart

Windows from the Start menu.
This completes installation of the driver.
Next, we recommend that you

enable background processing

on your

computer, so MIDI and audio processing will be as smooth as possible.
(

➔

“Enabling background processing”

(p. 20))

If the

“File signature verification”

(Step 4) setting was not set to

“Ignore,”

“Digital Signature Not

Found”

dialog box will appear.

If “File signature verification” is set to “Warn”

Click

[Yes]

Continue the installation.

If the

Insert Disk

dialog

box does not appear,
proceed to the next step.

If the

“File signature verification”

(Step 4) setting was not set to

“Ignore,”

“Digital Signature Not

Found”

dialog box will appear.

If “File signature verification” is set to “Warn”

Click

[Yes]

Continue the installation.

If the

Found New

Hardware Wizard

dialog

box does not appear,
proceed to the next step.

PCR-A30_e2.book 19 ページ２００３年１０月２２日　水曜日　午後３時１９分

Summary of Contents for PCR-A30

















































































































Search results

Summary of Contents for PCR-A30

Reviews:

Related manuals for PCR-A30

Brands by name

Popular brands

Edirol PCR-A30, Owner'S Manual

Search results

Summary of Contents for PCR-A30

Reviews:

Related manuals for PCR-A30

Brands by name

Popular brands