46
Using the PCR-A30 as a MIDI keyboard
Setting the MIDI Transmit Channel
To control the sound module, set the MIDI channel the PCR-A30 will use to transmit on to the same
channel the modules is using to receive on.
Use MIDI Channel mode to set the MIDI transmit channel.
●
MIDI Channel mode (MIDI CH)
This mode lets you set the transmission channel (
current channel
) of the keyboard and bender
lever.
Each controller has its own independent transmission channel setting. However, if
OMNI
47) is on, the controllers will also transmit on the current channel you specify here.
fig.MIDIch-1_60
fig.MIDIch
1
Press the
[MIDI CH]
button.
The
[MIDI CH]
button will light. The display will show the current channel
setting.
* The
[HEX]
or
[DECIMAL]
button will also light according to the
input mode
2
Use the
[DEC]
[INC]
buttons or the
[0]
–
[F]
keys of the keyboard to specify the desired channel
number.
3
Press the
[ENTER]
button.
The setting will be cancelled if you press another button instead of the
[ENTER]
button.
The current channel has now been set.
fig.MEMO
If the sound module is multitimbral, set the channel on the PCR-A30 so it matches the MIDI
channel of the Part in the module that you wish to control.
DEC
Change the current value by -1
INC
Change the current value by +1
00–0F
The input value
HEX
...00–0F
DECIMAL
...1–16
2
3
1
Multitimbral sound module
A sound generator that is able to produce many different sounds simultaneously is called a
“multitimbral sound module”
.
PCR-A30_e2.book 46 ページ 2003年10月22日 水曜日 午後3時19分