26
Getting Connected and Installing Drivers (Macintosh)
■
Setting the audio device
1
Use the following procedure to connect the PCR-A30 to your computer.
1.
With the
power switch
turned
OFF
, connect the included
AC adaptor
to the
PCR-A30
.
2.
Connect the
AC adaptor
to an electrical outlet.
3.
Use the
USB cable
to connect the
PCR-A30
to your
computer
.
2
Set the PCR-A30’s power switch to the
“DC”
position, and turn on the
power.
3
Open
“System Preferences”
and click
“Sound”
.
4
In the
Sound Effects
tab, set
“Play alerts and sound effects through”
to
“EDIROL PCR-A 44.1 kHz”
.
5
In the
Output
tab, set
“Choose a device for sound output”
to
“EDIROL
PCR-A 44.1 kHz”
.
6
In the
Input
tab, set
“Choose a device for sound input”
to
“EDIROL PCR-
A 44.1 kHz”
.
When you have finished making settings, close the dialog box.
Once the connections have
been completed, turn on
power to your various
devices in the order
specified. By turning on
devices in the wrong
order, you risk causing
malfunction and/or
damage to speakers and
other devices.
This unit is equipped with
a protection circuit. A brief
interval (a few seconds)
after power up is required
before the unit will operate
normally.
Although
“44.1 kHz”
is
used for the purpose of
explanation within this
document, this changes
depending on the actual
setting of the
sampling
frequency select switch
Once set this way, all
sounds from your
Macintosh (including
audio alerts) will be output
only through the PCR-A30,
not from the speakers of
your Macintosh.
When using the PCR-A30 with your software
Before using the PCR-A30 with your software, please note the following points.
• Turn on the power of the PCR-A30 before you start up your software.
• Do not disconnect the USB cable from the PCR-A30 or power-off the PCR-
A30 while your software is running.
• Quit your software before you power-off the PCR-A30.
• Turn off the Sleep function of your Macintosh.
• The PCR-A30 will not operate in the Mac OS X Classic environment. Use the
PCR-A30 when the Classic environment is not running.
*
For details on how to make these settings, refer to the owner’s manual for your
software.
*
For details on the PCR-A30’s input/output devices, refer to
PCR-A30_e2.book 26 ページ ２００３年１０月２２日 水曜日 午後３時１９分
