27
Connecting peripheral equipment
2
Connect the P-1 to your television.
When connection cables with resistors are used, the volume level of equipment connected to the
inputs the audio output jacks may be low. If this happens, use connection cables that do not
contain resistors, such as those from the Roland PCS series.
fig.c-tv-e
To connect the P-1 to your television, you’ll need audio cables and a video cable.
If your television has an S-video jack, we recommend that you use the S-video connector to make
connections, since this provides better image quality than the conventional (composite) video jack.
Audio cables are not included; you’ll need to obtain them separately.
TV
P-1 Rear Panel
to S-video input
Video cable ( S-video cable)
to Audio input
Audio cable
When using speakers (connect to Audio input of speakers)
When using
headphones
P-1_e.book 27 ページ ２００４年２月２４日 火曜日 午後７時５６分
