28
Turning the power on/off
Once the connections have been completed (p. 27), turn on power to your various devices in the order
specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to
speakers and other devices.
1
Press the power switch on the P-1’s rear panel to turn on the power.
This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is
required before the unit will operate normally.
2
Switch on your television or other connected equipment.
1
Turn off the power to your television or other connected equipment.
2
Press the power switch located on the P-1’s rear panel to turn off the power.
All buttons and indicators on the top panel will go out.
Turning the power on
Turning the power off
Adjusting the contrast of the P-1’s display
fig.k-lcd-e
You may find the P-1’s display difficult to read immediately after
turning on the power, after using the P-1 for an extended time, or when
using the P-1 in certain environments. If this occurs, you can adjust the
contrast by turning the LCD contrast adjustment knob located on the
rear panel. Turning the knob clockwise darkens the display.
dark
bright
P-1_e.book 28 ページ ２００４年２月２４日 火曜日 午後７時５６分
