83
Connecting your computer via USB (USB mode)
fig.c-pc-e
2
With the P-1 turned off, use a USB cable to connect the
P-1 to your computer.
3
Turn on the power of the P-1.
After a short time the
Photo Play mode
screen appears in the P-1’s display.
fig.b-menu
4
Touch the
[MENU] button
to access the menu screen.
fig.m-usb
5
Touch
USB
.
fig.fs-usb
The
USB mode
screen appears in the P-1’s display.
6
Touch
, the driver will be installed.
If
“This disk or device contains more than one type of content...”
appears, click
[CANCEL]
.
fig.xp-00
When installation of the driver is finished, the
icon will appear in the
task bar (displayed in the task bar at the lower right of your computer screen).
USB connector
of your computor
USB cable
P-1 Rear Panel
P-1_e.book 83 ページ 2004年2月24日 火曜日 午後7時56分