3.
To change the SSID of your access point’s 2.4GHz wireless network(s), go
to
“Wireless Setting” > “2.4GHz 11bgn” > “Basic”
. Enter the new SSID for
your 2.4GHz wireless network in the “SSID1” field and click “Apply”.
To utilize multiple 2.4GHz SSIDs, open the drop down menu
labelled
“Enable SSID number”
and select how many SSIDs you
require. Then enter a new SSID in the corresponding numbered
fields below, before clicking “Apply”.
4.
To configure the security of your access point’s 2.4GHz wireless
network(s), go to
“Wireless Setting” > “2.4GHz 11bgn” > “Security”
. Select
an “Authentication Method” and enter a “Pre-shared Key” or “Encryption
Key” depending on your choice, then click “Apply”.
If using multiple SSIDs, specify which SSID to configure using the
“SSID” drop down menu.
5.
Go to
“Wireless Setting” > “5GHz 11ac 11an”
and repeat steps
3 & 4
for
the access point’s 5GHz wireless network.
8
Summary of Contents for WAP1200
Page 1: ...WAP1200 User Manual 07 2014 v1 0 ...
Page 18: ...15 ...
Page 77: ...74 ...
Page 79: ...3 Click Local Area Connection 4 Click Properties 76 ...
