II.
Quick Setup
II-1. Initial Setup
1.
Connect the access point to a computer via Ethernet cable.
2.
Connect the power adapter to the access point’s 12V DC port and plug the
power adapter into a power supply.
3.
Please wait a moment for the access point to start up. The access point is
ready when the LED is
blue
.
4.
Set your computer’s IP address to
192.168.2.x
where
x
is a number in the
range
3 – 100
. If you are unsure how to do this, please refer to
V-1.
Configuring your IP address
for more information.
Please ensure there are no other active network connections on
your computer (disconnect Wi-Fi connections and Ethernet
cables).
5.
Enter the access point’s default IP address
192.168.2.2
into the URL bar of
a web browser.
6.
You will be prompted for a username and password. Enter the default
username “admin” and the default password “1234”.
5
Summary of Contents for WAP1200
Page 1: ...WAP1200 User Manual 07 2014 v1 0 ...
Page 18: ...15 ...
Page 77: ...74 ...
Page 79: ...3 Click Local Area Connection 4 Click Properties 76 ...
