You can use the “Acquire Current Time from your PC” button if
you wish to set the access point to the same time as your PC.
10.
The basic settings of your access point are now configured. Please
refer to
III. Hardware Installation
for guidance on connecting your access
point to a router or PoE switch.
II-3. Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup is a simple way to establish connections between WPS
compatible devices. You can use the WPS button to establish a connection
between the access point and a WPS-compatible wireless device/client.
1.
Press and hold the WPS/Reset button on the side of the access point for 2
seconds.
2.
Within two minutes, activate WPS on your WPS-compatible wireless
device. Please check the documentation for your wireless device for
information regarding its WPS function.
3.
The devices will establish a connection.
10
Summary of Contents for WAP1200
Page 1: ...WAP1200 User Manual 07 2014 v1 0 ...
Page 18: ...15 ...
Page 77: ...74 ...
Page 79: ...3 Click Local Area Connection 4 Click Properties 76 ...