WPS
Check/uncheck this box to enable/disable WPS
functionality. WPS must be disabled when
using MAC-RADIUS authentication (see
IV-3-1-3-6 & IV-3-4
).
Product PIN
Displays the WPS PIN code of the device, used
for PIN code WPS. You will be required to enter
this PIN code into another WPS device for PIN
code WPS. Click “Generate PIN” to generate a
new WPS PIN code.
Push-Button WPS
Click “Start” to activate WPS on the access
point for approximately 2 minutes. This has the
same effect as physically pushing the access
point’s WPS button.
WPS by PIN
Enter the PIN code of another WPS device and
click “Start” to attempt to establish a WPS
connection for approximately 2 minutes.
WPS Status
WPS security status is displayed here. Click
“Release” to clear the existing status.
48
Summary of Contents for WAP1200
Page 1: ...WAP1200 User Manual 07 2014 v1 0 ...
Page 18: ...15 ...
Page 77: ...74 ...
Page 79: ...3 Click Local Area Connection 4 Click Properties 76 ...
