Edimax WAP1200 User Manual Download Page 92

Page: 92 / 96

EU Declaration of Conformity

English:

This equipment is in compliance with the essential requirements and other relevant

provisions of Directive 1995/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC.

Français:

Cet équipement est conforme aux exigences essentielles et autres dispositions de la

directive 1995/5/CE, 2009/125/CE, 2006/95/CE, 2011/65/CE.

Čeština

Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními

směrnic

1995/5/ES, 2009/125/ES, 2006/95/ES, 2011/65/ES.

Polski:

Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami

określonymi Dyrektywą

UE 1995/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC..

Română

Acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi relevante ale

Directivei 1995/5/CE, 2009/125/CE, 2006/95/CE, 2011/65/CE.

Русский

Это оборудование соответствует основным требованиям и положениям Директивы

1995/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC.

Magyar:

Ez a berendezés megfelel az alapvető követelményeknek és más vonatkozó irányelveknek

(1995/5/EK, 2009/125/EK, 2006/95/EK, 2011/65/EK).

Türkçe:

Bu cihaz 1995/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC direktifleri zorunlu istekler ve

diğer hükümlerle ile uyumludur.

Українська

Обладнання відповідає вимогам і умовам директиви

1995/5/EC, 2009/125/EC,

2006/95/EC, 2011/65/EC.

Slovenčina

Toto zariadenie spĺňa základné požiadavky a ďalšie príslušné ustanovenia smerníc

1995/5/ES, 2009/125/ES, 2006/95/ES, 2011/65/ES.

Deutsch:

Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien

1995/5/EC, 2009/125/EC,

2006/95/EC, 2011/65/EC.

Español:

El presente equipo cumple los requisitos esenciales de la Directiva 1995/5/EC,

2009/125/EC, 2006/95/EC, 2011/65/EC.

Italiano:

Questo apparecchio è conforme ai requisiti essenziali e alle altre disposizioni applicabili

della Direttiva 1995/5/CE, 2009/125/CE, 2006/95/CE, 2011/65/CE.

Nederlands:

Dit apparaat voldoet aan de essentiële eisen en andere van toepassing zijnde bepalingen

van richtlijn 1995/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC..

Português:

Este equipamento cumpre os requesitos essênciais da Directiva 1995/5/EC, 2009/125/EC,

2006/95/EC, 2011/65/EC.

Norsk:

Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv

1995/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC.

Svenska:

Denna utrustning är i överensstämmelse med de väsentliga kraven och ö

vriga relevanta

bestämmelser i direktiv 1995/5/EG, 2009/125/EG, 2006/95/EG, 2011/65/EG.

Dansk:

Dette udstyr er i overensstemmelse med de væsentligste krav og andre relevante

forordninger i direktiv 1995/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC.

suomen kieli:

Tämä laite täyttää direktiivien 1995/5/EY, 2009/125/EY, 2006/95/EY, 2011/65/EY

oleelliset vaatimukset ja muut asiaankuuluvat määräykset.

-----------------------------------------------------------------------------------------------------------------------

WEEE Directive & Product Disposal

At the end of its serviceable life, this product should not be treated as household or general waste. It

should be handed over to the applicable collection point for the recycling of electrical and electronic

equipment, or returned to the supplier for disposal.

Summary of Contents for WAP1200

































































































Search results

Summary of Contents for WAP1200

Reviews:

Related manuals for WAP1200

Brands by name

Popular brands

Edimax WAP1200, User Manual

Search results

Summary of Contents for WAP1200

Reviews:

Related manuals for WAP1200

Brands by name

Popular brands