Edimax BR-6479Gn Quick Installation Manual Download Page 8

Page: 8 / 68

WPS/Reset

Button

Resets the router to factory default settings or

starts WPS function (

Reset

: press this button and

hold for 20 seconds to clear all settings.

WPS

Press this button for10~15 seconds to activate

WPS function)

Gigabit LAN Ports

(Yellow Ports 1-4)

Connects to computer or other web devices

Gigabit WAN Port

(Blue Port)

Connects to Cable/xDSL modems

5V Power Connector

Connects to the supplied power adapter

1-4 Features

•

Support IEEE 802.11b/g/n the standard 2.4 GHz and less bands.

•

Wireless data transmission rate up to 300Mbps (2.4GHz).

•

A good option for demands of streaming High-Definition (HD) videos, music and other media.

•

4 LAN ports design, data transmission rate up to 1000Mbps.

•

Comply with IEEE 802.3/ 802.3u/ 802.3ab standards.

•

Smart and automated router setup with exclusive feature – iQ Setup.

•

Features iQoS for quick and easy bandwidth management.

•

Build-in hardware button to enable/disable wireless signal.

•

Feature with Wireless Signal On/Off Scheduling function to manage the schedule for wireless

connection.

•

Support DHCP/ Static IP/ PPPoE/ WISP connection modes.

•

Support WMM, WEP, WPA, WPA2, DDNS, QoS, IP/MAC filter, DMZ and virtual server.

Summary of Contents for BR-6479Gn





































































Search results

Summary of Contents for BR-6479Gn

Reviews:

Related manuals for BR-6479Gn

Brands by name

Popular brands

Edimax BR-6479Gn, Quick Installation Manual

Search results

Summary of Contents for BR-6479Gn

Reviews:

Related manuals for BR-6479Gn

Brands by name

Popular brands