119
address which will be redirected to the port
number of local IP address defined above.
Comment
Please input any text to describe this mapping,
up to 16 alphanumerical characters.
Add
Add the mapping to virtual server table.
Reset
Remove all inputted values.
All existing virtual server mappings will be displayed in this page. To
delete one or more mappings, check the box of the mapping, then click
‘Delete Selected’ button to remove the mapping. To delete all existing
mappings, click ‘Delete All’ button. If you want to uncheck all boxes,
click ‘Reset’.
When you finished with the settings in this page, you can click ‘Apply’
button to save changes you made in this page, or you can click ‘Cancel’
to discard changes. After you click ‘Apply’ button, you’ll see the
following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
Summary of Contents for BR-6225N
