79
3-4-1 Basic Settings
You can set basic settings of wireless LAN here.
Please select the working mode of this broadband router from ‘Mode’
dropdown list first:
a.
AP
: Standard wireless AP (access point).
b. Station-Infrastructure:
This broadband router acts as both wireless
communication client and server - connects to another wireless access
point as client, and serves other wireless clients as server.
c.
AP Bridge-Point to Point
: Connect this router with another broadband
router, to expand the scope of network.
d.
AP Bridge-Point to Multi-Point
: Connect this router with up to four
other broadband routers, to expand the scope of network.
e.
AP Bridge-WDS
: Connect this router with up to four WDS-capable
broadband routers, to expand the scope of network.
f.
Universal Repeater:
This broadband router will repeat other wireless
access point’s signal to extend its wireless signal coverage, and also acts
as a wireless access point to serve other wireless clients.
Note : When you enable WISP connection mode, you will not get
“b.
Station-Infrastructure”
and
“f. Universal Repeater “
mode here
.
Summary of Contents for BR-6225N
