Edge-Core ES3510MA-DC, Management Manual, Page: 972 / 1098

C
HAPTER
40
| CFM Commands
– 972 –
ethernet cfm port-
enable
This command enables CFM processing on an interface. Use the no form to
disable CFM processing on an interface.
S
YNTAX
[ no ] ethernet cfm port-enable
D
EFAULT
S
ETTING
Enabled
C
OMMAND
M
ODE
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
U
SAGE
◆
An interface must be enabled before a MEP can be created with the
ethernet cfm mep command.
◆
If a MEP has been configured on an interface with the ethernet cfm mep
command, it must first be deleted before CFM can be disabled on that
interface.
◆
When CFM is disabled, hardware resources previously used for CFM
processing on that interface are released, and all CFM frames entering
that interface are forwarded as normal data traffic.
E
XAMPLE
This example enables CFM on port 1.
Console(config)#interface ethernet 1/1
Console(config-if)#ethernet cfm port-enable
Console(config-if)#
clear ethernet cfm
ais mpid
This command clears AIS defect information for the specified MEP.
S
YNTAX
clear ethernet cfm ais mpid mpid md domain-name ma ma-name
mpid – Maintenance end point identifier. (Range: 1-8191)
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
ma-name – Maintenance association name. (Range: 1-45
alphanumeric characters)
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec