Edge-Core ES3510MA-DC, Management Manual, Page: 90 / 1098

C
HAPTER
3
| Using the Web Interface
Navigating the Web Browser Interface
– 90 –
Traffic
Rate Limit Sets the input and output rate limits for a port 227
Storm Control Sets the broadcast storm threshold for each interface 229
Priority
Default Priority Sets the default priority for each port or trunk 231
Queue Sets queue mode for the switch; sets the service weight for each
queue that will use a weighted or hybrid mode
232
Trust Mode Selects DSCP or CoS priority processing 238
DSCP to DSCP 239
Add Maps DSCP values in incoming packets to per-hop behavior and
drop precedence values for internal priority processing
239
Show Shows the DSCP to DSCP mapping list 239
CoS to DSCP 242
Add Maps CoS/CFI values in incoming packets to per-hop behavior and
drop precedence values for priority processing
242
Show Shows the CoS to DSCP mapping list 242
PHB to Queue 235
Add Maps internal per-hop behavior values to hardware queues 235
Show Shows the PHB to Queue mapping list 235
DiffServ 245
Configure Class 246
Add Creates a class map for a type of traffic 246
Show Shows configured class maps 246
Modify Modifies the name of a class map 246
Add Rule Configures the criteria used to classify ingress traffic 246
Show Rule Shows the traffic classification rules for a class map 246
Configure Policy 249
Add Creates a policy map to apply to multiple interfaces 249
Show Shows configured policy maps 249
Modify Modifies the name of a policy map 249
Add Rule Sets the boundary parameters used for monitoring inbound traffic,
and the action to take for conforming and non-conforming traffic
249
Show Rule Shows the rules used to enforce bandwidth policing for a policy map 249
Configure Interface Applies a policy map to an ingress port 259
VoIP Voice over IP 261
Configure Global Configures auto-detection of VoIP traffic, sets the Voice VLAN, and
VLAN aging time
261
Table 6: Switch Main Menu (Continued)
Menu Description Page