Edge-Core ES3510MA-DC, Management Manual, Page: 232 / 1098

C
HAPTER
11
| Class of Service
Layer 2 Queue Settings
– 232 –
frames. If the incoming frame is an IEEE 802.1Q VLAN tagged frame,
the IEEE 802.1p User Priority bits will be used.
◆
If the output port is an untagged member of the associated VLAN,
these frames are stripped of all VLAN tags prior to transmission.
P
ARAMETERS
These parameters are displayed:
◆
Interface – Displays a list of ports or trunks.
◆
CoS – The priority that is assigned to untagged frames received on the
specified interface. (Range: 0-7; Default: 0)
W
EB
I
NTERFACE
To configure the queue mode:
1.
Click Traffic, Priority, Default Priority.
2.
Select the interface type to display (Port or Trunk).
3.
Modify the default priority for any interface.
4.
Click Apply.
Figure 111: Setting the Default Port Priority
S
ELECTING THE
Q
UEUE
M
ODE
Use the Traffic > Priority > Queue page to set the queue mode for the
egress queues on any interface. The switch can be set to service the
queues based on a strict rule that requires all traffic in a higher priority
queue to be processed before the lower priority queues are serviced, or
Weighted Round-Robin (WRR) queuing which specifies a scheduling weight
for each queue. It can also be configured to use a combination of strict and
weighted queuing.
CLI R
EFERENCES
◆
"queue mode" on page 864
◆
"show queue mode" on page 867