Edge-Core ECS4110-28T, Management Manual, Page: 901 / 1514

C
HAPTER
25
| General Security Measures
Network Access (MAC Address Authentication)
– 901 –
◆
When used with 802.1X authentication, the intrusion-action must be
set for “guest-vlan” to be effective (see the dot1x intrusion-action
command).
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#network-access guest-vlan 25
Console(config-if)#
network-access
link-detection
Use this command to enable link detection for the selected port. Use the
no form of this command to restore the default.
S
YNTAX
[ no ] network-access link-detection
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Interface Configuration
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#network-access link-detection
Console(config-if)#
network-access
link-detection
link-down
Use this command to detect link-down events. When detected, the switch
can shut down the port, send an SNMP trap, or both. Use the no form of
this command to disable this feature.
S
YNTAX
network-access link-detection link-down
action [ shutdown | trap | trap-and-shutdown ]
no network-access link-detection
action - Response to take when port security is violated.
shutdown - Disable port only.
trap - Issue SNMP trap message only.
trap-and-shutdown - Issue SNMP trap message and disable
the port.
D
EFAULT
S
ETTING
Disabled