Edge-Core ECS4110-28T, Management Manual, Page: 594 / 1514

C
HAPTER
15
| Multicast Filtering
Filtering and Throttling IGMP Groups
– 594 –
removes an existing group and replaces it with the new multicast
group.
P
ARAMETERS
These parameters are displayed:
◆
Interface – Port or trunk identifier.
An IGMP profile or throttling setting can be applied to a port or trunk.
When ports are configured as trunk members, the trunk uses the
settings applied to the first port member in the trunk.
◆
Profile ID – Selects an existing profile to assign to an interface.
◆
Max Multicast Groups – Sets the maximum number of multicast
groups an interface can join at the same time. (Range: 1-1023;
Default: 1023)
◆
Current Multicast Groups – Displays the current multicast groups the
interface has joined.
◆
Throttling Action Mode – Sets the action to take when the maximum
number of multicast groups for the interface has been exceeded.
(Default: Deny)
■
Deny - The new multicast group join report is dropped.
■
Replace - The new multicast group replaces an existing group.
◆
Throttling Status – Indicates if the throttling action has been
implemented on the interface. (Options: True or False)
W
EB
I
NTERFACE
To configure IGMP filtering or throttling for a port or trunk:
1.
Click Multicast, IGMP Snooping, Filter.
2.
Select Configure Interface from the Step list.
3.
Select a profile to assign to an interface, then set the maximum
number of allowed multicast groups and the throttling response.
4.
Click Apply.