Edge-Core ECS4110-28T, Management Manual, Page: 1345 / 1514

C
HAPTER
41
| LLDP Commands
– 1345 –
E
XAMPLE
Note that an IP phone or other end-node device which advertises LLDP-
MED capabilities must be connected to the switch for information to be
displayed in the “Device Class” field.
Console#show lldp info remote-device
LLDP Remote Devices Information
Local Port Chassis ID Port ID System Name
---------- ----------------- ----------------- -----------------------------
Eth 1/1 00-E0-0C-10-90-00 00-E0-0C-10-90-04
Eth 1/2 70-72-CF-5B-DA-D4 70-72-CF-5B-DA-D6
Console#show lldp info remote-device detail ethernet 1/1
LLDP Remote Devices Information Detail
---------------------------------------------------------------
Index : 4
Chassis Type : MAC Address
Chassis ID : FC-0A-81-B7-C7-E0
Port ID Type : MAC Address
Port ID : FC-0A-81-B7-C7-E1
Time To Live : 120 seconds
Port Description : Ethernet Port on unit 1, port 1
System Description : ECS3510-28P
System Capabilities : Bridge
Enabled Capabilities : Bridge
Management Address : 192.168.0.4 (IPv4)
Port VLAN ID : 1
Port and Protocol VLAN ID : VLAN 2 - supported, enabled
VLAN Name : VLAN 1 - DefaultVlan
Protocol Identity (Hex) : 88-CC
MAC/PHY Configuration/Status
Port Auto-neg Supported : Yes
Port Auto-neg Enabled : Yes
Port Auto-neg Advertised Cap (Hex) : 6C00
Port MAU Type : 16
Remote Power via MDI
Remote power class : PSE
Remote power MDI supported : Yes
Remote power MDI enabled : Yes
Remote power pair controllable : No
Remote power pairs : Spare
Remote power classification : Class1
Link Aggregation
Link Aggregation Capable : Yes
Link Aggregation Enable : No
Link Aggregation Port ID : 0
Remote Max Frame Size : 1522
Console#