Edge-Core ECS4110-28T, Management Manual, Page: 1066 / 1514

C
HAPTER
31
| Congestion Control Commands
Automatic Traffic Control Commands
– 1066 –
C
OMMAND
U
SAGE
◆
Once the upper threshold is exceeded, a trap message may be sent if
configured by the snmp-server enable port-traps atc broadcast-alarm-
fire command or snmp-server enable port-traps atc multicast-alarm-
fire command.
◆
After the upper threshold is exceeded, the control timer must first
expire as configured by the auto-traffic-control apply-timer command
before a control response is triggered if configured by the auto-traffic-
control action command.
E
XAMPLE
This example sets the trigger threshold for automatic storm control for
broadcast traffic on port 1.
Console(config)#interface ethernet 1/1
Console(config-if)#auto-traffic-control broadcast alarm-fire-threshold 255
Console(config-if)#
auto-traffic-control
auto-control-release
This command automatically releases a control response of rate-limiting
after the time specified in the auto-traffic-control release-timer command
has expired.
S
YNTAX
auto-traffic-control { broadcast | multicast }
auto-control-release
broadcast
- Specifies automatic storm control for broadcast traffic.
multicast - Specifies automatic storm control for multicast traffic.
C
OMMAND
M
ODE
Interface Configuration (Ethernet)
C
OMMAND
U
SAGE
◆
This command can be used to automatically stop a control response of
rate-limiting after the specified action has been triggered and the
release timer has expired.
◆
To release a control response which has shut down a port after the
specified action has been triggered and the release timer has expired,
use the auto-traffic-control control-release command.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#auto-traffic-control broadcast auto-control-release
Console(config-if)#