19
Default setting: siren/dialer enable
Press
User access code
ACTIVATION TYPE 2
This feature allows the dialer dial up the preset phone
number in sequence when the Control Panel is
triggered configured for arm or part-arm mode.
Default setting: dialer enable
Press
User access code
Note: If Control Panel does not memorize any phone
number, no action will be taken when Control Panel is
triggered.
TEST MODE
Press
User access code
The maximum allowable length of testing the system is
10 minutes. If 10 minutes expires, UI indication refers
to “UI_Error” and exits test mode straight away. If test
is finished before 10 minutes is out, press
to
exit this mode of which UI indication refers to
“UI_Success”.
While test is underway and the Control Panel receives
RF signal from the detector, the Control Panel will ding
dong.
During test mode, press
keypad more than 3
seconds, the Control Panel will emit system on/system
off command to the wireless siren.
During test mode, press
keypad more than 3
seconds, the Control Panel will only dial up the first
preset phone number.
ALARM DURATION
This is the maximum length of time that the Control
Panel will sound for, following an intrusion. Alarm
duration can be set for either 1 or 3 minutes.
Press
User access code
The maximum allowable length of inputting the alarm
duration is 15 seconds.
Press
for 1 minute
Press
for 3 minute
If 15 seconds expires or a sequence of incorrect input
is entered 3 times, the Control Panel will exit this mode
of which UI indication refers to “UI_Error”.
JAMMING DETECTION
This feature controls the Control Panels RF jamming
detection circuitry, which if enabled, will continuously
scan for radio jamming signals on the system operating
frequency.
Default setting: off
Press
User access code
The maximum allowable length of selecting jamming
detection on or off is 15 seconds.
Press
for on
Press
for off
If 15 seconds expires or a sequence of incorrect input
Summary of Contents for HA700
Page 23: ...23...
