3
LEARNING ID CODE
In order to prevent any unauthorized attempt to operate
or disarm your system, you must configure your system
to accept radio signals only from your own system
devices. All detectors and Remote Controllers have
their unique ID code, the Control Panel must learn
their codes individually for the system to operate
correctly.
For the Motion and Door/Window Contact Detectors,
simply pressing the tamper switch located adjacent to
the PCB will emit the ID code to the Control Panel
instantly with the Control Panel being set at the ID code
learning mode. For the Remote Controller, pressing any
button on the Remote Controller will emit the ID code to
the Control Panel instantly with the Control Panel being
set at the ID code learning mode.
Summary of Contents for HA700
Page 23: ...23...
