manualshive.com logo in svg

ECS P4VXMS, User Manual, Page: 69 / 84

Share
Download
ECS P4VXMS User Manual Download Page 69

 

63 

You should leave this item at the default Auto(ESCD). Under 
this setting, the system dynamically allocates resources to 
Plug and Play devices as they are required.  

If you cannot get a legacy ISA (Industry Standard Architecture) 
expansion card to work properly, you might be able to solve 
the problem by changing this item to Manual, and then open-
ing up the IRQ Resources and Memory Resources submenus.  

 

IRQ Resources   

The submenu allows you to individually assign an interrupt 
type for interrupts IRQ-3 to IRQ-15. 

CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software 

PnP/PCI Configurations 

Item 

  IRQ-3    assigned to        [PCI Device]

  

 

IRQ-4    assigned to        [PCI Device]

  

 

IRQ-5    assigned to        [PCI Device]

  

 

IRQ-7    assigned to        [PCI Device]  

  IRQ-9    assigned to        [PCI Device]  

  IRQ-10  assigned to        [PCI Device]

  

 

IRQ-11  assigned to        [PCI Device]

  

 

IRQ-12  assigned to        [PCI Device] 

 

 

IRQ-14  assigned to        [PCI Device] 

 

 

IRQ-15  assigned to        [PCI Device]   

Menu Level 

 

Legacy ISA for devices 

compliant with the original 

PC AT bus  specification, 

PCI/ISA PnP for devices  

compliant with the  Plug 

and Play standard whether 

designed for PCI or ISA 

bus architecture 

↑

 

↓

 

→

 

←

 : Move  Enter  : Select 

+/-/PU/PD:Value: 

F10: Save  ESC: Exit  F1:General Help

 

F5:Previous Values 

F6:Fail-Safe Defaults 

F7:Optimized Defaults 

PCI/VGA Palette Snoop (Disabled)

 

This item is designed to overcome problems that can be 
caused by some non-standard VGA cards. This board in-
cludes a built-in VGA system that does not require palette 
snooping so you must leave this item disabled. 

Assign IRQ for VGA/USB (Enabled) 

Names the interrupt request (IRQ) line assigned to the 
USB/VGA (if any) on your system. Activity of the selected IRQ 
always awakens the system. 

Press <Esc> to return to the previous screen. 

Summary of Contents for P4VXMS





















































































Reviews:

No comments