manualshive.com logo in svg

ECS P4VXMS, User Manual, Page: 36 / 84

Share
Download
ECS P4VXMS User Manual Download Page 36

 

30 

LUSB1/LUSB2: Front panel USB headers 

This mainboard has two additional USB ports installed on the 
board that serve the same function as USB2/USB3 but has 
different pinouts. If your USB connector match the pinouts be-
low, use LUSB1 or LUSB2.   

Pin 

Signal Name 

Pin 

Signal Name 

1 
3 
5 
7 
9 

+5V 
USB0- 
USB0+ 
EMPTY 
GND 

2 
4 
6 
8 

10 

GND 
No pin 
USB1+ 
USB1- 
+5V 

WOL1/WOM: Wake On LAN/Wake On Modem  

If you have installed a LAN card, use the cable provided with 
the card to plug into the mainboard WOL1 connector. This en-
ables the Wake On LAN (WOL) feature. When your system is 
in a power-saving mode, any LAN signal automatically re-
sumes the system. You must enable this item using the Power 
Management page of the Setup Utility. 

Pin 

Signal Name 

1 
2 
3 

5VSB 
Ground 
SENSE 

If you have installed a modem, use the cable provided with 
the modem to plug into the mainboard WOM1 connector. This 
enables the Wake On Modem (WOM) feature. When your sys-
tem is in a power-saving mode, any modem signal 
automatically resumes the system. You must enable this item 
using the Power Management page of the Setup Utility. See 
Chapter 3 for more information. 

JP5: Single color LED connector 

This connector is used to attach to devices that need a single 
color LED indicator.  

Summary of Contents for P4VXMS





















































































Reviews:

No comments