manualshive.com logo in svg

ECS P4VXMS, User Manual, Page: 63 / 84

Share
Download
ECS P4VXMS User Manual Download Page 63

 

57 

Power Management Setup Option 

This option lets you control system power management. The 
system has various power-saving modes including powering 
down the hard disk, turning off the video, suspending to RAM, 
and software power down that allows the system to be auto-
matically resumed by certain events. 

Power Management Timeouts 

The power-saving modes can be controlled by timeouts. If the 
system is inactive for a time, the timeouts begin counting. If 
the inactivity continues so that the timeout period elapses, the 
system enters a power-saving mode. If any item in the list of 
Reload Global Timer  Events is Enabled, then any activity on 
that item will reset the timeout counters to zero. 

Wake Up Calls 

If the system is suspended, or has been powered down by 
software, it can be resumed by a wake up call that is gener-
ated by incoming traffic to a modem, a LAN card, a PCI card, 
or a fixed alarm on the system realtime clock,  

CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software 

Power Management Setup 

Item Help 

 

ACPI function 

[Enabled] 

 

ACPI Suspend Type 

[S1(POS)] 

 

Power Management Option 

[User Define] 

 

HDD Power Down 

[Disable]  

 

Suspend Mode 

[Disable] 

 

Video Off Option 

[Suspend --> Off] 

 

Video Off Method 

[DPMS Support] 

 

MODEM Use IRQ 

[3] 

 

Soft-Off by PWRBTN 

[Instant-Off] 

 

PWRON After PWR-Fail  

[Off] 

  IRQ/Event Activity Detect 

[Press Enter]  

 

Menu Level       
 

↑

 

↓

 

→

 

←

 : MoveEnter  : Select  +/-/PU/PD:Value:  F10: Save  ESC: Exit  F1:General 

Help  F5:Previous Values 

F6:Fail-Safe Defaults 

F7:Optimized Defaults 

ACPI Function (Enabled) 

This  mainboard supports ACPI (Advanced Configuration and 
Power management Interface). Use this item to enable or dis-
able the ACPI feature. 

Summary of Contents for P4VXMS





















































































Reviews:

No comments