manualshive.com logo in svg

ECS P4VXMS, User Manual, Page: 17 / 84

Share
Download
ECS P4VXMS User Manual Download Page 17

 

11 

Jumper Settings

 

Jumper  Type 

Description 

Setting (

default

) 

JP1 

3 pin 

Clear CMOS 
jumper 

1-2: Normal 

2-3: Clear CMOS

 

JP1

1

 

JP2 

3 pin 

Wake on 
Key-
board/USB 
activity 

1-2: Enable 

2-3: Disable

 

 

JP2 

1

 

 

JP3 

3 pin 

BIOS flash 
protection 
jumper 

1-2: Unprotected 

2-3: Protected 

 

JP3 

1

 

JP1: Clear CMOS Jumper 

This jumper enables you to reset BIOS: 

1.  Turn the system off. 
2.  Short pins 2 and 3 on JP1. 
3.  Return the jumper to the normal setting. 
4.  Turn the system on. The BIOS is returned to the default set-

tings. 

JP2: Wake on Keyboard/USB activity 

This jumper enables any USB keyboard activity to power up a system 
that had previously been in a standby or sleep state.

 

JP3: BIOS Flash Protect Jumper 

This jumper is  used to protect the BIOS from being unintentionally 
flashed. Enable this jumper for protection and disable this jumper 
when you want to flash the BIOS. 

 

 

Summary of Contents for P4VXMS





















































































Reviews:

No comments