manualshive.com logo in svg

ECS P4VXMS, User Manual, Page: 60 / 84

Share
Download
ECS P4VXMS User Manual Download Page 60

 

54 

 SuperIO Device 

Scroll to this item and press <Enter> to view the following 
screen: 

CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software 

SuperIO Device 

Item Help 

 

Onboard FDC Controller 

[Enabled] 

 

Onboard Serial Port 1 

[3F8/IRQ4] 

 

Onboard Serial Port 2 

[2F8/IRQ3] 

 

UART Mode Select 

[Normal] 

 

UR2 Duplex Mode 

[Half] 

 

Onboard Parallel Port 

[378/IRQ7] 

 

Parallel Port Mode 

[ECP] 

 

ECP Mode Use DMA 

[3] 

 

Game Port Address 

[201] 

 

Midi Port Address 

[330] 

 

Midi Port IRQ 

[10] 

 

 

Menu Level     

 

 

↑

 

↓

 

→

 

←

 : Move  Enter  : Select 

+/-/PU/PD:Value: 

F10: Save  ESC: Exit  F1:General Help

 

F5:Previous Values 

F6:Fail-Safe Defaults 

F7:Optimized Defaults 

Onboard FDC Controller (Enabled) 

This option enables the onboard floppy disk drive controller.   

Onboard Serial Port 1 (3F8/IRQ4) 

This option is used to assign the I/O address and address and 
interrupt request (IRQ) for onboard serial port 1 (COM1).   

Onboard Serial Port 2 (2F8/IRQ3) 

This option is used to assign the I/O address and address and 
interrupt request (IRQ) for onboard serial port 2 (COM2).   

UART Mode Select (Normal) 

This field is available if the Onboard Serial Port 2 field is set to 
any option but Disabled. UART Mode Select enables you to 
select the infrared communication protocol-Normal (default), 
IrDA, or ASKIR. IrDA is an infrared communication protocol 
with a maximum baud rate up to 115.2K bps. ASKIR is 
Sharp's infrared communication protocol with a maximum 
baud rate up to 57.6K bps. 

UR2 Duplex Mode (Half) 

This field is available when UART 2 Mode is set to either 
ASKIR or IrDA. This item enables you to determine the infra-

Summary of Contents for P4VXMS





















































































Reviews:

No comments