manualshive.com logo in svg

ECS P4VXMS, User Manual, Page: 66 / 84

Share
Download
ECS P4VXMS User Manual Download Page 66

 

60 

USB Resume from S3  (Enable) 

When set to "Enabled," the system power will resume the sys-
tem from a power saving mode if there is any USB port activity. 

VGA (Off) 

When set to On, the system power will resume the system 
from a power saving mode if there is any VGA activity.  

LPT & COM (LPT/COM ) 

When this item is enabled, the system will restart the power-
saving timeout counters when any activity is detected on the 
serial ports, or the parallel port. 

HDD & FDD (ON) 

When this item is enabled, the system will restart the power-
saving timeout counters when any activity is detected on the 
hard disk drive or the floppy diskette drive. 

PCI Master (OFF) 

When set to Off, any PCI device set as the Master will not 
power on the system. 

PowerOn by PCI Card (Disabled) 

Use this item to enable PCI activity to wakeup the system 
from a power saving mode. 

WOL/WOM/Ring Resume (Disabled) 

Use this item to enable LAN or modem activity to wakeup the 
system from a power saving mode. 

RTC Alarm Resume (Disabled) 

When set to Enabled, the following two fields become avail-
able and you can set the date (day of the month), hour, minute 
and second to turn on your system. When set to 0 (zero) for 
the day of the month, the alarm will power on your system 
every day at the specified time. 

Summary of Contents for P4VXMS





















































































Reviews:

No comments