Ecoray ANYPLX 3-BT, User Manual

Page: 28 / 49

Diagnostic X-ray Unit
USER MANUAL
28
n
APR Mode
The 'APR Mode' is a function for user's convenience, that user can store an
irradiation values of each exposure part in advance. In 'APR Mode', User can
store twelve values at '12 Mode' and seven values at '7 Mode'.
Mode APR Key
12 Mode
1+5, 1+6, 1+7 / 2+5, 2+6, 2+7
3+5, 3+6, 3+7 / 4+5, 4+6, 4+7
7 Mode 1, 2, 3, 4, 5, 6, 7
1) Turn on the equipment's power switch.
2) Enter into the 'User Mode' by pressing Laser Key for 2 second.
3) Set to "U02" by kV UP/DOWN key, and select the Mode that user want by
using mAs UP/DOWN key. (12 Mode : "01", 7 Mode : "00")
4) After choosing the Mode, press the "Store" key during 2 sec for saving the
Mode.
5) Press the "Laser" key again for 2 sec and get out from User Mode.
6) 12 Mode Store
Select the one of 1-4 key on the OP Panel, and store the irradiation values
that user want at each 5-7 key. Set the kV value that user want by using kV
UP/DOWN key and also, set the mAs value by using mAs UP/DOWN key.
After that, save the values by pressing "Store" key for 2 sec. DO NOT press
the number from 1-4 key and 5-7 key at the same time.
7) 7 Mode Store
Press the "Store" key for 2 sec to save the irradiation value which is set by
'kV & mAs UP/DOWN key' at the each 1-7 key.