manualshive.com logo in svg

eCopy 3323B001 - imageFORMULA ScanFront 220e, Installation And Setup Manual, Page: 49 / 192

Share
Download
eCopy 3323B001 - imageFORMULA ScanFront 220e Installation And Setup Manual Download Page 49

 eCopy ShareScan

®

 Installation and Setup Guide 

|

 41

Configuring keyboard settings

The Keyboard Settings tab enables you to select a language for the hard keyboard as well as for 
the on-screen keyboard. It also enables you to configure additional settings for the on-screen 
keyboard.

To configure keyboard settings:

1

In the console tree, select 

System Information

 > 

Properties

 and then select the 

Keyboard Settings

 tab.

2

Configure the keyboard settings (see Table 3).

3

Click 

Save

.

Notes:

Some devices running ShareScan Embedded software support a hard keyboard and the on-screen 
keyboard. For ScanFront devices, ShareScan automatically detects the USB hard keyboard (but not a 
PS/2 hard keyboard).. You do not have to specify which keyboard to use on the device.
If you are using a Canon ScanFront device, eCopy recommends that you use a USB hard keyboard. If 
the ShareScan for Canon ScanFront software detects a USB keyboard, a keyboard icon will not appear 
to the right of fields that require text input.

TABLE 3. System information: Keyboard Settings tab

Section

Field Name

Description

Keyboard Settings

Select a language 
for the keyboard

The keyboard language.

Default .com entry

On-screen keyboard only. The default extension for the .com 
key, such as .com.

Add more entries

On-screen keyboard only. Used to specify additional extensions 
to include in the list that appears when the user at the device 
presses the arrow next to the .com key.
Additional entries can contain more than eight characters.

Used to delete entry.

Used to add more entries.

Summary of Contents for 3323B001 - imageFORMULA ScanFront 220e

































































































































































































Reviews:

No comments