eCopy 3323B001 - imageFORMULA ScanFront 220e Installation And Setup Manual Download Page 30

Page: 30 / 192

Quick Start: Installing and setting up ShareScan

To configure Express properties:

Select the

Express

tab.

This feature enables you to create a profile that minimizes user interaction at the device;
the Send screen will not appear on the Client screen at the device.

Select the

Enable

check box.

Enter information in the

Subject

and

Note

fields.

The user at the device will not have to specify a subject line or a note.

Note:

When you enable Express, the connector profile will not use the default subject line or notes
that you may have already specified on the Content tab.

Summary of Contents for 3323B001 - imageFORMULA ScanFront 220e

































































































































































































Search results

Summary of Contents for 3323B001 - imageFORMULA ScanFront 220e

Reviews:

eCopy 3323B001 - imageFORMULA ScanFront 220e, Installation And Setup Manual, Page: 30 / 192

Search results

Summary of Contents for 3323B001 - imageFORMULA ScanFront 220e

Reviews: