manualshive.com logo in svg

eCopy 3323B001 - imageFORMULA ScanFront 220e, Installation And Setup Manual, Page: 133 / 192

Share
Download
eCopy 3323B001 - imageFORMULA ScanFront 220e Installation And Setup Manual Download Page 133

 eCopy ShareScan

®

 Installation and Setup Guide 

|

 125

Scan to eCopy Desktop

™

The eCopy

™

 Scan to eCopy Desktop Connector enables ShareScan users at an eCopy-enabled 

device to scan documents and send them to recipients’ scan inboxes or to network home 
directory folders, where the scanned documents can be retrieved by eCopy Desktop. For 
information about using eCopy Desktop, refer to the eCopy Desktop documentation or Help.

Depending on the configuration of the connector, the recipient may be the user scanning the 
document or any other eCopy Desktop user whose scan inbox is set up to receive scanned 
documents via the connector. The connector can also be configured to send scanned documents 
to storage destination, specifically Windows, Novell, or FTP folders, or to folders on a USB Flash 
Drive.

The following list provides several notes about this connector:

■

You cannot configure a connector profile to send scanned documents to both scan 
inboxes/home directories and a storage destination.

■

When a ShareScan user at an eCopy-enabled device chooses a recipient, the scanned 
document is delivered to the recipient’s scan inbox or to the specified folder in the 
recipient’s network home directory.

■

You can configure the connector to secure the scan inboxes of recipients. Users must enter 
the network password associated with a recipient’s scan inbox before the connector can 
send scanned documents to the scan inbox. The Authenticate users option is automatically 
selected when the inbox type is set to “Home Directories”.

Any user can send a scanned document to any user’s scan inbox. However, only the owner 
can read from the scan inbox.

■

The list of available recipients that appears on the Specify Recipient screen (in the 
ShareScan Client) includes all users in the Windows Active Directory or Novell eDirectory, 
unless you restrict usage by choosing a base DN that limits the scope of the search.

Summary of Contents for 3323B001 - imageFORMULA ScanFront 220e

































































































































































































Reviews:

No comments