manualshive.com logo in svg

eCopy 3323B001 - imageFORMULA ScanFront 220e, Installation And Setup Manual, Page: 143 / 192

Share
Download
eCopy 3323B001 - imageFORMULA ScanFront 220e Installation And Setup Manual Download Page 143

 eCopy ShareScan

®

 Installation and Setup Guide 

|

 135

Authentication

Authenticate 
User

The options are:

■

None: Sends scanned documents to the destination without 
requiring user authentication.The Services Manager requires 
write access to the destination.
The FTP server must be configured to allow anonymous login to 
work with this option.

■

Logon as: Sends scanned documents to the destination using 
the specified authentication information; the user does not need 
to enter authentication information at the device. Specify the 
domain/tree, user ID, and password to use for authentication. 
The specified account requires write access to the destination.

■

RunTime: The user at the device must log on to the destination 
before the scanned document is sent. You specify the domain/
tree to use for authentication.

Note:

 If you select FTP Folder as a destination type and Session 

Logon is enabled, eCopy recommends that you select 
"Anonymous" or "Logon as" as the authentication type.

Server
(FTP only)

The FTP Server name.

Advanced

Enables you to configure the Advanced Account Settings.

TABLE 43. 

Scan to eCopy Desktop: Destination settings (continued)

Section

Field

Description

Summary of Contents for 3323B001 - imageFORMULA ScanFront 220e

































































































































































































Reviews:

No comments