manualshive.com logo in svg

eCopy 3323B001 - imageFORMULA ScanFront 220e, Installation And Setup Manual, Page: 28 / 192

Share
Download
eCopy 3323B001 - imageFORMULA ScanFront 220e Installation And Setup Manual Download Page 28

20  

|

  Quick Start: Installing and setting up ShareScan

5

When the “Test successful” message appears, select the 

General Settings

 tab.

■

To configure the profile to enable users to send scanned documents as e-mail 
attachments from their personal Microsoft Exchange account, select the 

Send from 

personal account

 option.

■

If you do not want to configure the profile to enable users to send scanned documents 
as e-mail attachments from their personal Microsoft Exchange account, clear the 

Send 

from personal account

 option. The connector will send the scanned documents from 

the ShareScan User Account.

■

To configure the profile to enable users to send scanned documents only to the logged 
on user, select the 

Send to self

 option. The Send screen will not appear on the Client 

screen at the device.

6

When you have specified the basic and general settings, click 

OK

.

The 

Settings Summary

 displays the current settings.

7

Click 

Save

 to save changes to the profile.

Summary of Contents for 3323B001 - imageFORMULA ScanFront 220e

































































































































































































Reviews:

No comments