manualshive.com logo in svg

eCopy 3323B001 - imageFORMULA ScanFront 220e, Installation And Setup Manual, Page: 145 / 192

Share
Download
eCopy 3323B001 - imageFORMULA ScanFront 220e Installation And Setup Manual Download Page 145

 eCopy ShareScan

®

 Installation and Setup Guide 

|

 137

Novell eDirectory

Novell 
eDirectory 
Server settings

Locate server at runtime: The connector finds the Global Catalog 
Server at runtime.
Always use the following server: The name of the Novell 
eDirectory Server to be used at the device.

LDAP Port

The port that you want the server to use. Default is 389.

Server requires 
SSL for 
communication

Select this option if the Novell eDirectory Server requires a Secure 
Socket Layer
(SSL).

Server allows 
Anonymous 
Bind

eDirectory can obtain information from the server without 
authenticating the user.

Search On

The search criterion that the server uses to find the sender:

■

First Name

■

Last Name

■

Common Name

■

User ID

The setting defines the information that the user sees on the 
Logon screen at the device.

Note:

 eCopy recommends that you select First Name, Last Name, 

or User ID. However, if you choose Common Name, eCopy 
recommends that you select a base DN to improve the search 
performance of this option. 

Base DN

Defines a starting point for the Global Catalog Server search that 
takes place from the authentication window at the device.  When 
you select a base DN (Distinguished Name), the Search while 
typing option searches the forest below the location of the Base 
DN. 
The browse button opens the Start Search At window, where you 
can select a Base DN in the Novell forest.
Only users within the DN can authenticate; however, documents 
can be sent to any user in the forest.
If this field is left blank, the search includes the entire forest.
Examples of potential base DNs are:

■

“DC=ecopy”

■

“CN=users”

■

“DC=ecopy “DC=com”

■

“OU=marketing,DC=ecopy”

TABLE 44. 

Scan to eCopy Desktop: Advanced Account settings (continued)

Environment type

Field name

Description

Summary of Contents for 3323B001 - imageFORMULA ScanFront 220e

































































































































































































Reviews:

No comments