VERSION: v3.0
REVISION DATE: 12/2/22
INSTALLATION GUIDE
INSTALLATION
INSTALLING END CLAMPS
AT THE END OF A ROW
1. Install the last mid clamps in the row.
2. Measure the rails from the last mid clamp to the module width plus 1".
3. Cut the rails at this mark. There is some adjustment in the end cap/clamp so it does not
need to be a perfect cut.
4. Install end clamps and end caps, tighten to 96 in-lb
ALTERNATIVE METHOD:
1. Install the last module in the row, tighten the mid clamps.
2. Using a circular saw with a metal blade, or carefully with a reciprocating saw, cut the rail
approximately 1" past the edge of the last module.
3. Install end clamps and end caps, tighten to 96 in-lb
Replace the tile that was moved and/or removed, or install the tile replacement flashing. If it
is to be notched, mark the tile for notching. Notching can be done with a grinding wheel or by
using a chisel.
PAGE
17
