VERSION: v3.0
REVISION DATE: 12/2/22
INSTALLATION GUIDE
INSTALLATION
PAGE
14
INSTALLING THE RAIL
1.
Place the rail in the Clickers.
2.
Ensure the rails extend a minimum of 2”
past the last attachments in each row.
3.
Push the rail into the L-foot clicker
starting on the side with the plastic
clips first, then roll the rail into seated
position. Verify the rail is sitting flush
with both ledges. If attachments
are extremely misaligned it may be
necessary to loosen the leveling bolt
and adjust the height of the L-foot.
Tighten the clamping bolt to 144 in-lbs.
4.
Level the rail if necessary by loosening
the bolt attaching the Clicker to the
L-foot or tile hook.
1
2
3
4
