VERSION: v3.0
REVISION DATE: 12/2/22
INSTALLATION GUIDE
INSTALLATION
CLICKFIT USING SIMPLEBLOCK-U
®
PRE-INSTALLATION:
The SimpleBlock-U can be installed on many different standing seam profiles. See SimpleBlock-U
Installation Manual for compatible and non-compatible standing seam profiles. Be sure that
each standing seam is no thicker than ½" in width.
INSTALLATION:
Position the SimpleBlock assembly on the panel
seam. Make sure the block is fully seated on the
metal seam.
Torque the 2 preinstalled oval point set screws to
150in-lbs using the included 3/16" hex drive.
Included with the block, slide the hex holt into the
channel on top of the SimpleBlock-U assembly.
Place the ClickFit Universal L-Foot over the hex bolt
followed by the serrated flange nut and torque to
150in-lbs.
1
2
3
4
1
3
2
4
1
"
MI
N
1
"
MI
N
1
"
MI
N
1
"
MI
N
FOLDING PROFILES
SNAPPING PROFILES
PAGE
13
