Modifying the setup options
In the
Setup
menu context you can set the options for
Key lock
,
Idle display brightness
,
Idle display mode
,
Beeper
volume
,
Manual feed
and view the
Time to service
(option, read only).
To modify the setup options, press the menu button to enter the
Setup
context. To move between the setup options,
press the edit buttons to display the settings. To modify a setting, press Enter and use the edit buttons to
increase/decrease the value. When finished, press the Enter button to confirm the set value.
The
Key lock
option enables you to lock the keyboard in order to prevent accidental changes of the settings. With the
key lock enabled, you can navigate the menu to display current values, but you cannot edit any of the settings, except
the Key lock itself. Note that this option does not disable the Fumis ALPHA remote control. The
Key lock
setting offers
the following options:
OFF: the Key lock is disabled, all buttons are available
Lo: the edit mode is disabled (the Enter button is locked)
Hi: the edit mode and the power on/off is disabled (the Enter button and the Power button are
locked, only return to Lo or OFF option is enabled)
Tip
We recommend you to use the Key lock option when cleaning the Fumis ALPHA keyboard or when
children use the keyboard without adult supervision.
You can increase or decrease the display brightness in the idle mode to conserve energy. As soon as you touch the
keyboard, the brightness of the display will increase to default value.
The
Idle display mode
setting offers the following options:
OFF: The keyboard stays in the selected menu context. In case you were in the edit mode, the
changes are discarded and the edit mode is exited.
Option 1: the keyboard exits the current menu context and cycles between the current room
temperature, fuel autonomy and clock. In case the
Fuel Autonomy
is set to OFF or the
combustion system does not support Fuel autonomy option, this menu context is skipped.
Option 2: The keyboard exits the current menu context and moves to the
Temperature
menu.
The display shows the current room temperature.
Option 3: The keyboard exits the current menu context and moves to the
Clock
menu. The
display shows the current time.
Option 4: The keyboard exits the current menu context and moves to the
Fuel autonomy
menu. In case the
Fuel Autonomy
is set to OFF, the keyboard exits this menu context and
moves to the
Temperature
menu.
Beeper volume setting controls the loudness of the keyboard sound signals.
With the option
Manual feed
you can manually start the feeder. The feeder will operate for a short while and then
stop. With this option you can clean or empty the feeder. You can use this option before the first ignition, when the
feeder id empty.
The
Time to service
shows in days when you should contact the service personnel to perform regular maintenance of
your combustion system. This value (in days) is read-only can be modified by authorized personnel only.
