Eckold KRAFTFORMER KF 800, Operating Instructions Manual

Page: 20 / 72

20 2021-09-21 | ECKOLD AG Kraftformer KF 800
4. Transport / Set up
4.8 Unpacking / Setup of the machine
approx. 850 kg
Upon delivery the product is mounted on a shipping pallet.
1. Remove band and pins at the bottom edge of the box.
2. Remove the cover and the cardboard sleeve.
3. Hang the load hook in the li ft ing screw on the top side of the machine (without li ft ing the machine).
4. Remove the four fi xation nuts.
5. Li ft the machine out of the sledge, using the eyebolt (3) and set it down carefully on a level industrial fl oor.
No anchoring of the machine is necessary!
Make sure that the product does not turn when it is li ft ed!
Only use a crane with a rotating crane hook.
Clean the Kra ft former from possible soiling such as packing residue, dust, and the similar.
WARNING
— Li ft ing the product with a forkli ft without su ffi cient carrying capacity
— Staying underneath the suspended product
—> If the product falls: Risk of death or injury to personnel, damage to the product
• Only use a forkli ft with su ffi cient carrying capacity to li ft the product.
• Do not hang around near or underneath the product during transportation.
• Wear protective boots to protect your feet.
2
1
3
4