34
Chapter 2
•
Configuration via Web UI
3500782-0001 Revision E
ATC/LTE page
The ATC/LTE page includes:
•
ATC/LTE robustness On/Off radio button. Turning on the robustness can
improve receive performance in the presence of an interferer such as an ATC
or LTE base station. However, use the default Off setting in the typical case
where interference is not detected or expected.
•
ATC scan button. This makes the UT scan for an ATC interferer (see page 45.)
•
ATC scan status bar. This indicates the results of the last scan and whether an
ATC interferer was detected.
Figure 19: ATC/LTE page
Feature management page
This page was removed in 5.9.6.4 as it is no longer necessary. The following
subsections describe how the features that were on this page are handled.
SMS Remote Management
SMS Remote Management allows the unit to receive and act on special remote
control SMS messages. This feature is configured on the Security passwords page,
see page 37.
Enhanced Security
Enhanced Security allows you to lock the terminal to control local access. It is now
enabled from the Security passwords page, see page 37.
BGAN Services vs M2M Mode
With release 5.9.5.1 and above, the UT will automatically switch between M2M and
BGAN Services based on the type of SIM card installed in the unit. A Feature code is
no longer required.